Various filter grades. Reliable cleaning of the media

Cartridge filters:

• Sight glass for assessing the degree of soiling from the exterior.
• Easy filter change
• Moisture sensor as an option
• Filter receptacle easy to clean, as can be unscrewed

New Cartridge filters:

• Compact design
• Easy filter change
• Moisture sensor available as an option

Mounted filters:

• Mounted filter for front panel installations or 19" rack modules
• Connectors inside, filters outside: a very clean solution
• Porthole for assessing degree of soiling from outside
• For glass-fibre and PTFE filters
• Simple filter replacement from front

Inline filters:

• For inline pipe installation
• Can be added to existing systems
• Small, compact design

The Series 7F filters are of versatile application, safe and easy to use. They reliably clean solids from the media used. The filter elements used have a precise microporous structure resulting in the reliable retention of particles larger than the pores in the filter elements during filtration. Various filter grades are possible on request. Four filter types are available to suit the specific application:

The cartridge filter is a reliable filter from the EM-TECHNIK modular system. The sight glass makes it possible to assess from the exterior the condition and degree of soiling due to the substances filtered out. It is not necessary to open the filter housing. If required the cartridge filter is also available with a drain valve so that any condensate can be drained without problems.

The new cartridge filter has impressive compact dimensions and ensures reliable filtration even for smaller application configurations. General conditions and the degree of soiling from materials filtered out can be checked at any time from outside through the viewing glass. There is no need to open the filter housing.

The main advantages of front panel installations of the mounted filter is manifested during actual use. Even though the media line connections are located behind the front panel, the filter is still easily accessible from the front. During operation, you can assess how soiled the filter is by simply looking through the sight glass. Whenever necessary, the filter can be quickly and easily replaced from the front. In addition to front panel installations, the filter can also be installed as a 19" rack module in analysis systems.

Our inline filter is intended for installation in pipes. It is small, compact and low cost. In practice it is easy to replace and can be added later without problems.