SCP66 [sanitary, selfpriming and air handling pump, up to 2.2 kW]

The Packo SCP66 range are air handling and selfpriming centrifugal pumps. They are ideally suited as CIP-return pump, to transfer a mixture of cleaning fluid and air. This range is limited to 30 m³/h / 130 US.GPM - 18 m / 60 ft - 2,2 kW / 3 HP.

Technical specifications

• The design is based on the design of the FP66 range.
• Only the pump casing is different, making the pump air handling and selfpriming.

Working principle

• For good priming, a sufficient volume of liquid should be available in the casing.
• Liquid and air are sucked from the inlet chamber and mixed by the impeller. The mixture leaves the volute and is separated. The air leaves the pump through the outlet while the liquid is recirculated. This liquid is mixed again with air from the inlet chamber. This cycle continues until all the air is removed from the suction line.
• From that moment, the pump starts functioning as a normal centrifugal pump. When the pump is stopped, it will retain enough liquid to selfprime when next started.

Advantages

Compared to liquid ring pumps SCP pumps have following advantages:  

• Standardisation of components.
• Large clearance allowing impurities to pass without causing wear.
• The pump performance remains the same even after years of operation.
• Lower NPSH-＆#118alue
• Higher efficiency
• Flat head-flow curve
• The pump can run against closed valve without providing extra high pressure or absorbing more power.

Field of application

• Numerous SCP66 pumps prove their reliability in many CIP-return applications worldwide while you also find them in other sanitary applications where its selfpriming and/or airhandling capabilities are required.
• The SCP66 range goes up to 30 m³/h / 130 US.GPM - 18 m / 60 ft - 2.2 kW / 3 HP.